Product Details
The molten iron is produced in ultra high-charge electric arc furnaces. Veins are poured steel into multi-polishing continuous casting machines
Chemical composition of Billet as Per The following table : | |||||||||||||||
Chemical analysis | According To: | ||||||||||||||
Designation | |||||||||||||||
C % | Mn % | Si% | P % | S % | Cr % | Ni % | Cu% | N % | |||||||
1 | AISI 1006 | 0.05_0.08 | 0.30_0.40 | 0.07_0.15 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
2 | AISI 1008 | 0.05_0.10 | 0.35_0.50 | 0.10_0.15 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
3 | AISI 1010 | 0.08_0.13 | 0.30_0.60 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
4 | AISI 1012 | 0.10_0.15 | 0.30_0.60 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
5 | AISI 1015 | 0.13_0.18 | 0.30_0.60 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
6 | AISI 1018 | 0.15_0.20 | 0.60_0.90 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
7 | AISI 1020 | 0.18_0.23 | 0.60_0.90 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
8 | AISI 1022 | 0.18_0.23 | 0.70_1.00 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
9 | AISI 1023 | 0.20_0.25 | 0.30_0.60 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
10 | AISI 1025 | 0.22_0.28 | 0.30_0.60 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
11 | AISI 1030 | 0.28_0.34 | 0.60_0.90 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
12 | AISI 1037 | 0.32_0.38 | 0.70_1.00 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
13 | AISI 1045 | 0.43_0.50 | 0.60_0.90 | 0.10_0.20 | 0.04 | 0.05 | 0.1 | 0.1 | 0.15 | 0.012 | AISI (SEA) Standard | ||||
ssc standard (common steel grade, as per Gost 380-2005) | |||||||||||||||
14 | St4 SP-SSS | 0.18_0.23 | 0.60_0.70 | 0.15_0.30 | 0.04 | 0.05 | 0.3 | 0.3 | 0.5 | 0.012 | |||||
15 | St3 SP | 0.14_0.22 | 0.40_0.65 | 0.15_0.31 | 0.04 | 0.05 | 0.3 | 0.3 | 0.5 | 0.012 | Gost380-2005 | ||||
16 | St4SP | 0.18_0.27 | 0.60_0.70 | 0.15_0.32 | 0.04 | 0.05 | 0.3 | 0.3 | 0.5 | 0.012 | Gost380-2005 | ||||
17 | St5SP | 0.28_0.37 | 0.60_0.80 | 0.15_0.33 | 0.04 | 0.05 | 0.3 | 0.3 | 0.5 | 0.012 | Gost380-2005 | ||||
18 | St6SP | 0.38_0.49 | 0.60_0.80 | 0.15_0.34 | 0.04 | 0.05 | 0.3 | 0.3 | 0.5 | 0.012 | Gost380-2005 | ||||
Note | |||||||||||||||
SSC is able to produce any National, international or any customer requirements of steel Grade Specification | |||||||||||||||
Weight | cross section | length | other length |